Canon 10, elura20 When Operating 2 Canon DV Camcorders (Remote Sensor Mode)

44
E
Using the Full
Range of Features
To prevent interference from other
Canon wireless controllers being used
nearby, there are 2 remote sensor
modes and an off setting. The wireless
controller and the camera have to be set
to the same mode in order to be
compatible.
When Operating 2 Canon DV Camcorders (Remote Sensor Mode)
To turn the remote sensor off:
Open the menu and select SYSTEM. Then select WL.REMOTE, set it to OFF
Band close the menu.
•Bappears in the display.
To change the mode...
...on the camera:
Open the menu and select SYSTEM. Then select WL.REMOTE, set it to
A1or A2and close the menu.
• The selected mode will appear on the display for 4 seconds.
...on the wireless controller:
Press and hold the REMOTE SET button on the wireless controller.
Simultaneously press the ZOOM Wbutton for mode 1 or the ZOOM
T button for mode 2. Continue to press simultaneously forover 2
seconds.
• Be sure to set the wireless controller to the same mode as the camera.
A1: Mode 1
A2: Mode 2
OFFB: Sensor off
WL.REMOTE••• 1
SYSTEM
( 35)
The wireless controller and the camera have been preset to mode 1. If you change
the mode on the camera, be sure to change the mode on the wireless controller to
the same mode.
REMOTE
ZOOM
WT
SET
CARD
REC
CARD
PLAY
MOVIE
P.SCAN
VCR