3Auto Image Rotation
Vertical shots can be rotated automatically so that they are displayed upright during playback.
1
2
3
Select [Auto rotate].
Turn the <5> dial to select [cAuto rotate], then press <0>.
Select [OnzD].
Turn the <5> dial to select [On zD], then press <0>.
Take a vertical shot.
For the image review right after image capture, the image will not be displayed vertically on the LCD monitor.
4Playback the image.
Press the <x> button.
XThe vertical shot will be displayed vertically as shown on the left.
If you had set Auto rotate to [Off] and then took the vertical picture, the picture will not be rotated automatically even if you later set [On zD] and playback the image.
If the vertical image is taken while the camera is pointed up or down, the image might not rotate automatically for playback.
If you had set [On zD] or [On D] and took the vertical picture, it will be rotated automatically when you view it with a personal computer installed with the software provided with the camera.
If you had set [On D] and took the vertical picture and then set [On zD] and played back the picture, it will be rotated automatically. When you change the camera’s orientation between horizontal and vertical, the camera orientation sensor will make a small sound. This is normal and not a defect.
111