Error Codes

Error code

Probable cause and solution

If an error occurs, the camera’s LCD monitor will display the error screen, and the LCD panel will display an error code like “Err xx.” To resolve the error, follow the instructions on the LCD monitor.

If an error keeps occurring, there may be a problem. Write down the error code and consult your nearest Canon Service Center.

To exit the error screen, set the <4> switch <2> and <1> or remove and reinstall the battery.

Error Code

Countermeasures

 

Communications between the camera and lens is

Err 01

faulty.

 

Clean the lens contacts. (p.11)

 

There is a problem with the CF card.

Err 02

Try any of the following:

• Replace the CF card.

 

• Remove and reinsert the CF card.

 

• Format the CF card.

 

 

 

The CF card is full and cannot record further.

Err 04

Erase unnecessary images in the card or replace the

 

CF card.

Err 05

The auto pop-up of the built-in flash has been

obstructed.

 

 

 

 

An error other than the above has occurred.

Err 99

This error may occur if you use a non-Canon lens and

 

the camera or lens does not operate properly.

If an error code appears right after shooting, the picture might not have been captured. When the camera is ready to shoot again, press the <x> button and check if the picture was captured.

183