S Printing with Bubble Jet Direct

7 Start printing.

Turn the <5> dial to select [Print], then press <0>.

XThe printing will start.

XDuring the printing, the <l> button

lamp will blink in blue.

When the printing ends, the screen will return to step 1.

To stop the printing, press <0> while [Stop] is displayed, then turn the <5> dial to select [OK] and press <0>.

If [Bordered] is set, the date might be imprinted on the border, depending on the printer.

If [Date] is [On], the date recorded for the image will appear on the print. The date will appear on the lower right of the image.

If you select [Stop] during the printing, the picture being printed will stop printing and the paper will be discharged.

If a problem occurs during printing, an error message will appear on the camera’s LCD monitor. Select [Stop] or [Continue]. If you select [Continue] and the printer does not resume printing, it will resume automatically after you resolve the problem.

If you are using a BJ printer equipped with an operation display panel, the error No. will be displayed if an error occurs. To resolve the respective error, refer to the BJ printer’s instruction manual.

144