Preparation for Image Transfer
Connect the Camera to the Personal Computer
1Set the camera’s <4> switch to <2>.
2 Connect the camera to the personal computer.
Use the interface cable that came with the camera.
To the camera’s <p> terminal, connect the cable’s plug with the <D> icon facing toward the front of the camera.
To the personal computer’s USB port, connect the plug on other end of the cable.
3 Set the camera’s <4> switch to <1> or <J>.
On the computer, when the dialog box to select the program appears, select [EOS Utility] with the mouse, then click [OK]. When the camera model selection screen appears, select [EOS 30D], then click [OK].
XThe [EOS Utility] screen will appear on the computer, and the direct image transfer screen will appear on the camera’s LCD monitor.
While the direct image transfer screen is displayed, pressing the shutter button halfway will not return the camera ready for shooting.
Before disconnecting the cable, turn off the camera first and pull out the cable by grasping the plug (instead of the cord).
If the [EOS Utility] screen does not appear on the computer, see “Connect the Camera and the Computer and then Start EOS Utility” in the Software Instruction Manual in the
161