3Selecting the Images to be Transferred

Do not insert into the camera a CF card whose transfer order were set by a different camera and then try to specify a transfer order. The selected images might all be overwritten. Also, depending on the image type, the transfer order may not be possible.

For the transfer order, if you select an image captured in the RAW+JPEG mode, it will be counted as one image. During the direct image transfer, both the RAW and JPEG images will be transferred to the personal computer.

Preparation for Image Transfer

Before connecting the camera to the personal computer, be sure to first install the EOS DIGITAL Solution Disk software (in the CD-ROM provided with the camera) to the personal computer. If you connect the camera to the personal computer before installing the software, the personal computer will not recognize the camera properly and the images cannot be transferred.

Installing the Software

Install the software to the personal computer.

Refer to the separate Software Guide to install the software to the personal computer.

Camera Settings

1

2

Select [Communication].

Turn the <5> dial to select [c Communication], then press <0>.

Select [Print/PC].

Turn the <5> dial and select [Print/ PC], then press <0>.

If [Communication] is set to [LAN (WFT-E1)], the personal computer will not be able to recognize the camera.

160