Canon 1234B004 3Setting the Date and Time

3Setting the Date and Time

Set the date and time as shown below.

1

2

Select [Date/Time].

Turn the <5> dial to select [cDate/ Time], then press <0>.

XThe date/time screen will appear.

Set the date and time.

Pressing the <0> button toggles the orange box between and . With the box displayed, turn the <5> dial to select the date or time to be corrected, then press <0>.

With the box displayed, turn the <5> dial to select the correct numeral, then press <0>.

3Confirm the setting.

With the box displayed, turn the <5> dial to select [OK], then press <0>.

XThe date/time will be set and the menu will reappear. The minute that was set will then start from 0 sec.

Each captured image is recorded with the date and time it was taken. If the date and time are not properly set, the wrong date/time will be recorded. Make sure you set the date and time correctly.

39