11
1Loosen the locking ring.
Turn the locking ring as shown by the
arrow to loosen it.
2Attach the control unit.
Slip the control unit’s mounting foot
into the camera’s hot shoe all the
way.
3Tighten the locking ring.
Turn the locking ring as shown by the
arrow. The locking pin will then
protrude from the mounting foot.
To detach the control unit, loosen the
locking ring until the locking pin
retracts, then detach the control unit.

Attaching the Control Unit

MR14_MT24_01.fm Page 11 Tuesday, December 20, 2005 4:35 PM