33
1Set the MR-14EX or MT-24EX as
the master unit.
Press the <D> button to select
<a>.
Press the <f> button to select
<yk>.
X<w> will be displayed.
Press the <e> button to select a
channel 1 to 4.
2Set the slave unit.
Set the same channel as with the
master unit.
Set the ID to <C>.
As for the setting procedure, refer to
the slave Speedlite’s instruction
manual.
3Position the slave unit(s).
Face the slave unit C’s sensor toward
the master unit.
Do not put any obstructions between
the master unit and slave unit(s) C.
4Check that the flash is ready.
When the slave unit(s) C is ready to
fire, the AF-assist beam will blink for 1
sec.
MR14_MT24_03.fm Page 33 Tuesday, December 20, 2005 4:36 PM