Message | Action |
|
|
Toner Empty/Waste | The toner in the toner cartridge is low, and the drum unit is full of |
Toner Tank Full | waste toner. |
| Replace the toner cartridge or the drum unit with a new one. |
|
|
Insufficient Memory | The print job was too complex for available memory. Discard the last |
| printed page, and try one or more of the following: |
| • Close other applications while printing this job. |
| • Print the job in smaller sections. |
| • Try reprinting the job with a lower resolution, such as 300 dpi. |
| • Reformat the most complicated pages in the print job to reduce |
| graphics and other complex formatting. |
|
|
Communication error | Your computer and printer are not communicating. This happens if |
| the printer power shuts off, the cable is disconnected, or the cable is |
| not bidirectional. |
|
|
Printer Error | CAPT has detected an internal device error. |
| 1 Unplug the machine. |
| 2 Plug the machine in again. |
| 3 If the same error occurs, unplug the machine again and plug it |
| back in. |
| 4 If the error persists, contact your local authorized Canon service |
| representative. Reference Guide |
|
|
Device Busy | The device is being used by another job. Please wait until the job is |
| finished. |
|
|
Port Busy | The printer port is being used by other equipment. |
|
|
Printing Temporarily | Your computer could not transfer the data to the device due to the |
Stopped | large amount of data, or a data transfer error occurred. Click Resume |
| to resume printing. |
|
|
Waiting to Print | The current job has been interrupted by another job. Please wait until |
| the job is finished. Printing will begin automatically. |
|
|
Energy Saver Mode | The printer is in the energy saver mode. |
|
|
Incompatible Device | The connected device cannot be used. Make sure that the device |
| connected to the specified port is compatible and connected |
| correctly. |
|
|
5
Troubleshooting