Canon 3025, 3030, 3035, 3045 To set the System Manager ID and password:

Customizing System Settings 3-7
3
Customizing Settings
Restrict Sending to Domains:
NOTE
• For more information on Access Number Management, see Chapter 10, "Storing/
Editing Address Book Settings," in the Sending and Facsimile Guide.
• For more information on restricting sending to domains, confirming entered fax
numbers, allowing the sending of PDF documents with expired certificates, and
always adding a device signature to PDF documents, see Chapter 11, "System
Manager Settings," in the Sending and Facsimile Guide.
●To set the System Manager ID and password:
❑Click [Register ID and Password].
❑Specify the necessary fields ➞ click [OK].
Details of each item are shown below.
Select to restrict sending to only domains you allow.
To add an allowed domain, enter the domain name,
and click [Add]. To edit an allowed domain, select
the domain from the drop-down list, enter the new
domain name, and click [Replacement]. To delete an
allowed domain, select the domain from the
drop-down list and click [Delete].
To allow sending to the subdomains of a domain,
select [Permit Send to Subdomains], and select the
domain from the Permitted Domains drop-down list.
Use ID and Password:Set the System Manager ID and password. If this check
box is selected, a dialog box prompting you to enter
the ID and password is displayed whenever you try to
use Additional Functions.
System Manager ID: Set the System Manager ID (seven digits maximum).
System Password: Set the System Manager password (seven digits
maximum).
Confirm: Enter the password again. If the number you enter here
is different from the number entered for [System
Password], an error dialog box appears.