XEditing the Movie’s First and Last Scenes

You can edit out the first and last scenes of a movie in 1-sec. increments.

1 On the movie playback screen, select [X].

XThe editing screen will be displayed.

2 Specify the parts to be edited out. Select either [] (Cut beginning) or [] (Cut end), then press <0>.

Tilt <9> to the left or right to see the previous or next frames. Holding it down will fast forward the frames. Turn the <5> dial to browse frame-by-frame. After deciding which part to edit out, press <0>. The portion highlighted in blue on the top of the screen is what will remain.

3 Check the editing.

Select [7] and press <0> to playback the portion highlighted in blue.

To change the editing, go back to step 2. To cancel the editing, select [] and press <0>.

4 Save the movie.

Select [], then press <0>. X The save screen will appear.

To save it as a new movie, select

[New file]. Or to save it and overwrite the original movie file, select [Overwrite]. Then press <0>.

Since the editing is done in 1-sec. increments (position indicated by [X]), the exact position where the movie is edited may differ slightly from the position you specified. If the card does not have enough room, [New file] will not be selectable. More movie editing functions are available with ZoomBrowser EX/ ImageBrowser (provided software).

167