Select [Custom WB regist.].

OCustom White Balance

Register image on card

First follow step 4 under “Capture and register the image” (p.73, 74) to take a picture of a plain, white object. This image saved in the card can then be registered for Custom WB. The procedure up to step 2 is the same as with “Capture and register the image”.

1

2Select the Custom WB No. to be registered.

3 Select [Register image on card]. Turn the <5> dial to select [Register

image on card], then press <0>. X The images saved in the card will be

displayed.

4Select the image to be used for registrating the Custom WB data.

You can also display a four- or nine-image index by pressing the <y> button. Turn the <5> dial to select the image to be registered for the Custom WB data, then press <0>.

5 Select [OK].

Turn the <5> dial to select [OK], then press <0>.

XThe Custom WB data will be registered. When the message appears, press <0> to return to step 3.

To use the Custom WB, see “Selecting and Shooting with the Custom WB data” (p.76).

If the image was captured while the Picture Style was set to [Monochrome] (p.67), it cannot be selected in step 4.

75