Before You Start

3Set the Power-off Time/Auto Power Off

To save battery power, the camera turns off automatically after a certain time of non-operation. You can change this auto power-off time. If you do not want the camera to turn off automatically, set this to [Off]. After the power turns off, you can turn on the camera again by pressing the shutter button or other button.

1Select [Auto power off].

Under the [5] tab, select [Auto power off], then press <0>.

2Set the desired time.

Turn the <5> dial to select the setting, then press <0>.

Even if [Off] has been set, the LCD monitor will turn off automatically after 30 min. to save power. (The camera’s power does not turn off.)

3Silencing the Beeper

Prevents the beeper from sounding when focus is achieved.

1Select [Beep].

Under the [2] tab, select [Beep], then press <0>.

2Select [Off].

Turn the <5> dial to select [Off], then press <0>.

3Card Reminder

This prevents shooting if there is no card in the camera.

1Select [Release shutter without card].

Under the [2] tab, select [Release shutter without card], then press <0>.

2Select [Disable].

Turn the <5> dial to select [Disable], then press <0>.

52