Installing and Removing the Card 
The camera can use a CF card and SD card. Images can be recorded when at least one card is installed in the camera.
If both card slots have a card, you can select which card to record images with or record the same images simultaneously on both cards (p.56, 57).
If you use an SD card, be sure the card’s write protect switch is set upward to enable writing/erasing.
Installing the Card
1
2
Write protect switch
Open the cover.
Flip out and turn the cover release handle as shown by the arrow.
Insert the card.
The left slot is for a CF card, and the right slot is for an SD card.
As shown in the illustration, face the CF card’s label side toward you and insert the end with the small holes into the camera.
If the card is inserted in the wrong way, it may damage the camera.
XThe CF card eject button will stick out.
With the SD card’s label facing you, push in the card until it clicks in place.
3 Close the cover.
Press the cover until it snaps shut.
36