3Custom Function Settings

C.Fn I -14 Apply shooting/metering mode

While holding down the <A> (AE lock) button, you can switch to the registered setting (shooting mode, metering mode, shutter speed, aperture, or exposure compensation).

Disable: Pressing the <A> button will lock the exposure (AE lock).

Enable: By holding down the <A> button, you can instantly switch to the registered setting.

Register: Set the desired setting for the AE lock button: Shooting mode, metering mode, shutter speed, aperture, or exposure compensation.

When you select [Register], [With AE lock button (AF on/AF

off)] will be displayed where you can set the <A> AE lock button to also execute AF or not. Select [AF on/AF off] to register the setting to the camera.

This setting cannot be registered if the shooting mode is set to “Bulb”.

C.Fn I -15 Flash sync. speed in Av mode

You can set the flash-sync speed for flash photography in the aperture- priority AE (f) mode.

0:Auto

The flash sync speed is set automatically within a range of 1/300 sec. to 30 sec. to suit the scene’s brightness. High-speed sync can also be used.

1:1/300-1/60 sec. auto

Prevents the sync speed from being set too slow under low-light conditions. It is effective for preventing subject blur and camera shake. However, while the subject will be properly exposed with the flash, the background may come out dark.

2:1/300 sec. (fixed)

The flash-sync speed is fixed to 1/300 sec. This more effectively prevents subject blur and camera shake than with setting 1. However, the background may come out darker than with setting 1.

When 1 or 2 is set, high-speed sync cannot be used with an external Speedlite.

212