Installing and Removing the Battery

Installing the Battery

Insert a fully charged Battery Pack LP-E4 into the camera.

1 Removecap. the battery compartment

2

Removing the Battery

Insert the battery.

Insert the battery firmly all the way, and turn the release handle as shown by the arrow.

1 Flip out the battery release handle and turn it as shown by the arrow.

2 Pull out the battery.

To prevent shorting, be sure to attach the protective cover (p.24) to the battery.

When not using the camera, attach the battery compartment cap (p.19).

If the battery’s rubber lining (to repel water) is not clean, use a moist cotton swab to wipe it clean.

Rubber lining

32