3 Custom Function Settings

C.Fn I -10 Select usable metering modes

Disable: All the metering modes (q: Evaluative, w: Partial, r: Spot, e: Center-weighted average) will be selectable.

Enable: Only the metering modes set with [Register] will be selectable.

Register: To make a metering mode unselectable, uncheck the checkmark <X>. After entering the settings, select [Apply].

C.Fn I -11 Exposure mode in manual exposure

You can set the metering mode to be used in the manual exposure mode.

0: Specified metering mode

3: Spot metering

1: Evaluative metering

4: Center-weighted average

2: Partial metering

 

With settings 1 to 4, you cannot change the metering mode by pressing the <Q> button during shooting.

C.Fn I -12 Set shutter speed range

Disable: The settable shutter speed range will be 1/8000 sec. to 30 sec.

Enable: The settable shutter speed will range from the highest shutter speed to the lowest shutter speed set with [Register].

Register: The highest shutter speed can be registered within 1/8000 sec. to 15 sec., and the lowest shutter speed can be registered within 30 sec. to 1/4000 sec. After entering the settings, select [Apply].

C.Fn I -13 Set aperture value range

Disable: The settable aperture will range from the camera-attached lens’ maximum aperture to minimum aperture.

Enable: The settable aperture will range from the smallest to largest aperture set with [Register].

Register: The smallest aperture can be registered within f/91 to f/1.4, and the largest aperture can be registered within f/1.0 to f/64. After entering the settings, select [Apply].

211