Red-Eye CorrectionLevel the camera.

● Adjust the camera’s tilt on the left and right

sides so that the center of the electronic level turns green.

• If the electronic level does not appear in Step 1, press the nbutton to display the 4tab. Choose [Custom Display], then add to or .

•If you tilt the camera too far forward or backward, the electronic level will turn gray, and you will not be able to use it to level the camera.

•The electronic level will not appear while shooting a movie.

•Holding the camera vertically will change the orientation of the electronic level.

•If you can’t shoot levelly even when using the electronic level, calibrate

the electronic level (p. 166), then try again.

Red-Eye Correction

You can automatically correct red-eye that occurs in images taken with the flash.

Choose [Flash Control].

●Press the nbutton to choose [Flash Control] in the 4tab, then press the m button.

Adjust the setting.

●Press the opbuttons or turn the Êdial to choose [Red-Eye Corr.], then press the qrbuttons to choose [On].

XOnce set, Œwill appear on the screen.

109