Changing the Color and Shooting

• To change part of the pre-registered settings (except the shooting mode), choose or and changes the settings, then repeat Steps 2–3. These settings will not be reflected in other Shooting modes.

•To return contents registered to or to the default settings, turn the mode dial to or , then choose [Reset All] (p. 51).

Changing the Color and Shooting

You can change the look of an image when shooting. However, depending on shooting conditions the image may become coarse, or the colors may not come out as expected.

Color Accent

You can choose to retain a single color and change the rest to black and white in a composition.

Choose T.

●Follow Steps 1 – 2 on p. 62 to choose T.

Press the lbutton.

XThe unchanged image and the Color Accent image will alternately display.

●The color for default settings is green.

Specify the color.

●Position the center frame so it is filled with

the color you want and press the qbutton. XThe specified color will be recorded.

 

Specify the range of colors.

Recorded color

● Press the opbuttons or turn the Êdial

to change the range of colors to be

 

 

retained.

113