Adjusting the Flash Output

In Dmode, you can choose 3 levels of flash output.

Set the mode dial to D.

Choose the level of flash output.

●After pressing the rbutton, immediately turn the ÷dial to choose the level of output, then press the mbutton.

XOnce set, ~will appear on the screen.

You can also set the flash output with the following methods. However, it cannot be set with the rbutton when an external flash (sold separately) is attached. In this case, set the flash output using methods with an asterisk *.

•After pressing the mbutton, press the opbuttons to choose ~, then press the qrbuttons or turn the Êdial. *

•Press the nbutton and choose [Flash Control] from the 4tab. Then

choose [Flash utput] and press the qrbuttons.*

•Press the rbutton, then the nbutton, or press and hold the rbutton

for more than 1 second, and the setting screen will appear. Choose [Flash Output], then press the qr buttons.

Checking for Shut Eyes

When the camera detects the possibility that people have their eyes shut, appears.

Choose [Blink Detection].

●Press the nbutton, then choose [Blink Detection] in the 4tab. Press the qrbuttons to choose [On].

Shoot.

XWhen a person with shut eyes is detected, a frame and appear.

111