Using an Externally Mounted Flash (Sold Separately)

Set [ND Filter] to [On].

After pressing the mbutton, press the

opbuttons to choose , then press the qrbuttons or use the Êdial to choose .

Configure the externally mounted flash.

Follow Step 4 on p. 181. to make settings.

Shoot.

You can shoot in E-TTL automatic flash exposure compensation mode by setting the camera to either G, B, or M modes.

When the scene is too bright, set the aperture values in Bor D, then shoot.

Be sure the cords from the ff Camera Shoe Cord, Macro Ring Lite or Macro Twin Lite do not obstruct or interfere with the flash.

While shooting with a tripod, adjust the direction of the camera so that the flash heads do not contact the tripod or bracket.

Depending on the placement of the controller, it may come into contact with the LCD monitor.

Use the screen for shooting. The viewfinder cannot be used.

8mode is not available.

185