Shooting with Servo AFComplete the settings.

● Press the button.

• The Spot AE Point frame can be linked with the AF frame (p. 101).

• The AF frame will be set to normal size when using Digital Zoom (p. 58) or Digital Tele-converter (p. 59).

Shooting with Servo AF

While the shutter button is pressed halfway, the focus and exposure will continue to adjust, allowing you to take pictures of moving subjects without missing a shot.

Choose [Servo AF].

●ress the nbutton to choose [Servo AF] in the 4tab, then press the qr buttons to choose [On].

Focus.

●The focus and exposure will be maintained where the blue AF frame appears while you press the shutter button halfway.

• The camera may not be able to focus in some conditions.

• In low light conditions, AF frames may not turn blue even after pressing the shutter button halfway. In this case, you can set the focus and exposure with the AF frame setting.

•If a correct exposure cannot be obtained, the shutter speed and aperture value appear in orange. Release your finger from the shutter button, then press it again halfway.

•You cannot shoot with the AF lock in this mode.

•The [AF-Point Zoom] option in the 4tab is not available in Servo AF mode.

•Not available when using Q(p. 56).

94