Adjusting the Flash Output

In D mode, you can choose 3 levels of flash output.

Set the mode dial to D.

Choose the flash output level.

zAfter pressing the m button, press the opbuttons or turn the Âdial to choose ~, then press the m button.

Complete the setting.

zPress the opbuttons or turn the Âdial to choose the flash output, then press the

mbutton.

XOnce set, ~will appear on the screen.

• You can also set the flash output by pressing the nbutton to choose [Flash Settings] (p. 100) from the 4tab, then choose [Flash Output] and press the qr buttons to choose a setting.

•In M and B modes, you can set the flash output if you press the nbutton to choose [Flash Settings] from the 4tab, then set [Flash Mode] to [Manual].

•With the flash raised, if you press the rbutton and immediately press the n button, the setting screen will appear.

111