Trimming

You can cut out a portion of a recorded image and save it as a new image file.

Choose [Trimming].

Trimming Area

Trimming Area Display

Recorded pixels after trimming

zPress the nbutton to choose [Trimming] from the 1tab, then press the m button.

Choose an image.

zPress the qrbuttons or turn the Âdial to choose an image, then press the mbutton.

Adjust the trimming area.

XA frame will appear around the portion of the image to be trimmed.

XThe original image will display in the upper left and the trimmed image will display in the lower right.

zIf you move the zoom lever, you can change the frame size.

zIf you press the opqr buttons, you can move the frame.

zIf you press the l button, you can change the frame orientation.

zIn an image with detected faces, gray frames appear around the faces located in the upper left image. The frames can be

used for trimming. You can switch between frames by turning the  dial.

zPress the m button.

Save as a new image and display.

zFollow Steps 4 and 5 on p. 146.

•Images recorded at a pixel setting of (p. 61), or images resized to (p. 146) cannot be edited.

•Images that can be trimmed will have the same width and height ratio after trimming.

•The number of recorded pixels in a trimmed image will be smaller than before trimming.

•Movies cannot be edited.

147