Canon 5044B001, 5045B001, SX220 HS, SX230 HS Choose [Connection info], Disabling Eye-FiTransfer, Checking Connection Information, Choose [Disable] in [Eye-Fitrans.]

Using an Eye-Fi Card

• The power saving function does not work while transferring images (p. 52).

•If mode is chosen, the Eye-Fi connection will be interrupted. Choosing another Shooting mode or entering Playback mode will reopen

the Eye-Fi connection, but movies made with mode may be retransferred.

Checking Connection Information

You can check the Eye-Fi card’s access point SSID, or connection status.

Choose [Connection info].

zPress the nbutton to choose [Eye-Fi Settings] from the 3 tab, then press the m button.

zPress the opbuttons or turn the Âdial

to choose [Connection info], then press the m button.

zThe connection info screen will appear.

Disabling Eye-Fi Transfer

You can set the card to disable Eye-Fi transfer.

Choose [Disable] in [Eye-Fi trans.].

zPress the nbutton to choose [Eye-Fi Settings] from the 3 tab, then press the m button.

zPress the opbuttons or turn the Âdial to choose [Eye-Fi trans.], then press the qr buttons to choose [Disable].

What if [Eye-Fi Settings] does not appear?

[Eye-Fi Settings] will not appear when an Eye-Fi card is not inserted in the camera, or when an Eye-Fi card’s write-protect tab is in the locked position. For this reason, settings cannot be changed for Eye-Fi cards equipped with a write- protect tab when the tab is in the locked position.

178