Checking the Focus
You can magnify the area of a recorded image that was inside the AF frame to check the focus.
Press the lbutton to switch to the focus check display (p. 44).XA white frame will appear where the AF frame was when the focus was set.
XA gray frame will appear on a face detected during playback.
XThe area within the orange frame appears magnified.
Switch frames.zMove the zoom lever toward konce.
XThe screen shown on the left will appear.
zress the mbutton to move to a different frame when multiple frames appear.
Change the magnification level or location.zUse the zoom lever to change the display size, and the opqrbuttons to change the display position while checking the focus.
zPress the nbutton to reset the
display to Step 1.
The focus check display is not available for movies.
Changing Image Transitions
You can choose from 3 transition effects when switching between images in single image playback.
Choose [Transition].zPress the nbutton to choose [Transition] from the 1tab, then press the qr buttons to choose a transition effect.
131