Shooting or Viewing Images in Easy Mode

In Easy mode, operational instructions are displayed on the screen, and the camera is set so that only the buttons, the zoom lever and the movie button (p. 30) explained on this page are functional. This prevents incorrect operation of the camera, allowing even beginners to take and view worry-free pictures.

Shooting

zSet the mode dial to 9.

z Follow Steps 3 – 5 on pp. 24 25 to shoot (no sound will play).

z Press the rbutton to turn off the flash. ! will appear on the screen. Pressing the r button again turns on the flash and appears on the screen. The flash will automatically fire in low light conditions.

Since the flash will not fire when lowered, you cannot change settings even if you press the rbutton. To set the flash to , first raise it manually, then press the r button to change the setting.

Viewing

z Press the 1 button, then press the qr buttons or turn the  dial to switch images.

z Press the 1 button, then press the m button, and all the shots you have taken will display for about 3 seconds each.

Press the m button again to stop the slideshow.

zTo erase an image, choose the image to erase and press the pbutton. Press the qr buttons or turn the Âdial to choose [Erase], then press the mbutton.

29