Using the Self-Timer

Using the Self-Timer to Prevent Camera Shake

The camera will shoot approximately 2 seconds after the shutter button is pressed, preventing any camera shake that occurs when pressing the shutter button.

Choose Î.

zFollow Step 2 on p. 58 to choose Î.

XOnce set, Î will appear on the screen.

z Follow Step 3 on p. 58 to shoot.

Customizing the Self-Timer

You can set the delay (0 – 30 seconds) and the number of shots (1 – 10 shots).

Choose $.

zFollow Step 2 on p. 58 to choose $, then press the nbutton immediately.

Choose the settings.

zPress the op buttons to choose [Delay] or [Shots].

zPress the qrbuttons or turn the Âdial to

choose a value, then press the m button.

XOnce set, $ will appear on the screen. z Follow Step 3 on p. 58 to shoot.

What if the number of shots is set to two or more shots?

Exposure and white balance settings are set with the first shot.

If the flash fires or you set a high number of shots, the shooting interval may take longer than usual.

If the memory card fills, shooting stops automatically.

When you set the delay for more than 2 seconds, the lamp and self-timer sound speed up 2 seconds before the shutter releases (the lamp remains lit when the flash will fire).

59