5 Click [OK] to close the scanner properties.
Under Mac OS X
1 Start CaptureOnTouch.
2 Click [Scan First].
3 Click [OFF] next to [Scans in the full auto mode].
4 Click the [Scanner setting] button.
5 Click [ON] next to [Use advanced settings dialog box].
6 Click 
.
This will open the advanced settings dialog box for the scanner.
7 Click 
to display the [Scanner Information] dialog box.
8 Click [Maintenance] to display the [Maintenance] dialog box.
9 Reset the counters.
If you replaced the feed rollers, click [Reset] for [Current Rollers Count].
If you replaced the separation pad, click [Reset] for [Current Pad Count].
10 Click 
to close the [Maintenance] dialog box.
102