4

5

Double-click [ONTOUCHL.exe].

 

IMPORTANT

 

If you configure scanning conditions that require a large amount

CaptureOnTouch Lite starts, and the main screen appears.

 

 

of the computer’s memory, scanning may be disabled. If an error

IMPORTANT

 

 

message appears due to insufficient memory while scanning is in

Do not close the feed tray before the main screen of

 

progress, exit the application and try scanning again using

CaptureOnTouch Lite appears.

 

different scanning condition settings.

Hint

 

 

6 Click the Start button.

 

•The auto play screen may not appear in some operating environments. In such cases, open the [ONTOUCHLITE] drive in Windows Explorer, for example, and start the application directly by double-clicking ONTOUCHL.exe.

Depending on your operating system, the drive name may not be [ONTOUCHLITE]. Open the drive on which ONTOUCHL.exe is located, and start the application directly.

•Depending on your operating system, [CaptureOnTouch Lite] may appear in the auto play screen. In such cases, double-click [CaptureOnTouch Lite] to start CaptureOnTouch Lite.

Set the scanning method.

Scanning of the document starts.

When scanning of the whole document is completed, the output settings screen appears.

Hint

A

B

ASpecify whether to enable continuous scanning. When previewing the scanned image or splitting up a large document to scan in parts, select [ON] to enable continuous scanning.

BSpecify whether to scan the document in full auto mode. When you want to specify arbitrary scanning conditions, select [OFF] and configure the scanner settings. (See p. 37)

If a document is scanned when [Enable continuous scanning] is set to [ON], the continuous scanning screen (see p. 40) appears when scanning of the document is finished.

35