4 | Set the scanning method. | 5 | Click the Start button. |
A
B
ASpecify whether to enable continuous scanning. When previewing the scanned image or splitting up a large document
to scan in parts, select [ON] to enable continuous scanning.
BSpecify whether to scan the document in full auto mode. When you want to specify arbitrary scanning conditions, select [OFF] and configure the scanner settings. (See p. 70)
IMPORTANT
If you configure scanning conditions that consume a large amount of the computer’s memory, scanning may stop because of insufficient memory. If an error message appears due to insufficient memory while scanning is in progress, exit the application, change the scanning conditions, and then try scanning again.
Scanning of the document starts.
When scanning of the whole document is completed, the output settings screen appears.
Hint
If a document is scanned when [Enable continuous scanning] is set to [ON], the continuous scanning screen (see p. 72) appears when scanning of the document is finished.
If you place the next document and click [Scan], scanning of the document starts.
When scanning of all the documents is finished, click [Next].
68