Hint
If a job is assigned to the Start button, the document is scanned and the scanned images are output according to the settings of the job. CaptureOnTouch ends automatically 5 seconds after the output process finishes.
Scanner Settings
By default, CaptureOnTouch scans with scanning conditions that match the document because scanning in full auto mode is enabled. If you want to specify, for example, the scanning mode and document size, you can configure the desired scanning conditions in the scanner settings.
The scanner setting items are common to Scan First and Select Scan Job.
When Scan First:
For Scan First, configure the scanner settings before you start scanning.
When Select Scan Job:
For Select Scan Job, configure the scanner settings for each job.
Setting Basic Items
Scanner settings include the basic items that are configured in [Scanner setting], and the setting items that are configured in the advanced settings dialog box. The settings in the advanced settings dialog box are applied for settings other than the basic items.
The settings in the driver settings dialog box are applied for any other settings.
Color mode
Select from the following modes for scanning documents.
Detect automatically | Automatically determines the color mode based |
| on the document content and scans |
| accordingly. |
Scans the document in color. | |
Grayscale | Scans the document in Grayscale. |
Black and White | Scans the document in black and white |
| (binary). |
Page Size
Specify the page size of the document.
If you specify [Match original size], the page size of the scanned document is detected and the images are saved at the detected size.
82