Canon Initializing the External Hard Drive, 4 Press, IMPORTANT, 154 Š External Connections, 5 Initialize the external hard drive

Initializing the External Hard Drive

1Power the camcorder using the compact power adapter.

Do not disconnect the power source or turn off the camcorder until the initialization is completed.

2 Press Tto set the camcorder to playback mode.

3Connect the camcorder to the external hard drive using the optional UA-100 USB Adapter.

Connection #-2. Refer to Connection Diagrams (A140).

4 Press .

5 Initialize the external hard drive.

[ Other Settings] >q>[Initialize ] > [Initialize] >[Complete Initialization]1 >[Yes]2 >[OK]

1Touch this option if you want to physically erase all the data rather than just clear the file allocation table of the hard drive. For large-capacity hard drives this operation can take several hours.

2If you selected the [Complete Initialization] option, you can touch [Cancel] > [OK] to cancel the initialization while it is in progress. All recordings will be erased and the hard drive can be used without any problem.

6Safely end the connection to the external hard drive before physically disconnecting it.

IMPORTANT

•Initializing the external hard drive will permanently erase all the data on the hard drive (including your recordings, previous data not saved with the camcorder, and partitioned drives). Make sure to copy in advance important data to a computer or other device.

154 Š External Connections