4Touch the [Encryption Key] control button to enter the encryption key or password of the wireless access point and then touch [OK].

•If the encryption method of the wireless access point is set to WEP, the WEP index key will appear on the screen. Select the same index key of the access point.

5Touch [Automatic] to automatically obtain an IP address.

•To assign the IP address manually, touch [Manual] and perform the procedure in To manually assign an IP address (A167).

•A screen to test the settings will appear.

6Select whether to test the settings.

•You can touch [Check Current Configuration] to review the network settings.

•If you touched [Yes], a test of the settings will be performed and a confirmation screen will appear. Touch [OK].

7Save the settings of the connection point.

[Yes] >[OK]* >[X]

* After touching [OK], you can review the network settings. Touch [Wi-Fi Setup]

>[Check Current Configuration] >Desired connection point >[Î] or [Í]

>[K] three times when finished.

To manually enter a wireless access point (step 3)Enter the details of the wireless access point.

Enter the access point’s SSID >[OK] >[OK] >Enter the authentication/encryption method* and, if applicable, the encryption key of the access point >[OK] > Continue to step 5

*If you select [Open], you can select [No Encryption] or [WEP]. If you select, [Open] >[WEP] or [Shared Key WEP], you will need to specify the WEP index key.

Wi-Fi Functions Š 169