4Select the memory that contains the recordings you wish to transfer wirelessly and touch [OK].

•You can select more than one memory.

•Touch [All files] to transfer all the recordings, or [New files] to transfer only those recordings that have not been previously transferred.

•Once connected, the wireless transfer will begin automatically.

•You can touch [Stop] and then [X] to cancel the wireless transfer while it is in progress.

5 Touch [OK].

IMPORTANT

•Do not open the memory card slot cover during wireless transfer.

•Observe the following precautions when transferring files. Failing to do so may interrupt the transfer and incomplete files may remain at the transfer destination.

-Do not disconnect the power source or turn off the camcorder.

-Do not change the camera mode.-Do not connect the optional WM-V1 Wireless Microphone.

•If the file transfer is interrupted, select [New Files] and perform the file transfer again.

•If incomplete files remain at the transfer destination, check the content and make sure they are safe to delete before deleting them.

NOTES

•AVCHD movies transferred using Network Utility will be saved in the Videos folder on the computer by default. If you start VideoBrowser after you transfer AVCHD movies, the destination folder will automati- cally be added to the software's Library.

•MP4 movies transferred using Network Utility will be saved in the same location as AVCHD movies. If you start ImageBrowser EX after you transfer MP4 movies, the same destination folder will automatically be added to ImageBrowser EX. If you change the destination folder in Network Utility before transferring files, make the same change in the ImageBrowser EX settings.

•Depending on the wireless router's settings and capability, it can take some time to upload video files.

Wi-Fi Functions Š 173