Cannot upload files wirelessly using an Eye-Fi card.

- q>[Eye-Fi Communication] is set to [Off] (…appears onscreen). Set it to [Auto- matic].

-Wireless communication is not available with an Eye-Fi card in recording mode or while the optional WM-V1 Wireless Microphone is attached to the camcorder. Set the camcorder to playback mode or remove the WM-V1.

--/,Wireless communication is not available with an Eye-Fi card when the cam- corder has established a wireless connection. Make sure the camcorder has ended the con- nection.

-Opening the LCD panel may help when the wireless connection is not strong enough.

-During wireless transfer, wireless communication may stop when the wireless signal condi- tions worsen (‰appears onscreen). Perform wireless transfer in a place with good signal conditions.

-Contact the card manufacturer’s customer care.

Connections with External Devices

Video noise appears on the TV screen.

-When using the camcorder in a room where a TV is located, keep a distance between the compact power adapter and the power or antenna cables of the TV.

Playback looks fine on the camcorder but there is no image on the TV screen.

- The video input on the TV is not set to the video terminal to which you connected the cam- corder. Select the correct video input.

The camcorder is connected using the supplied HDMI cable, but there is no picture or sound from the HDTV.

-Disconnect the supplied HDMI cable and then restore the connection or turn the camcorder off and then on again.

The camcorder is connected using the supplied HDMI cable, but HDMI-CEC does not work (cannot play back using the TV’s remote control).

-Disconnect the HDMI cable and turn off the camcorder and the TV. After a short while turn them on again and restore the connection.

-q>[Control for HDMI] is set to [Off]. Set it to [On].

-HDMI-CEC is not activated on the connected TV. Activate this function on the TV.

-Even with TV sets compatible with HDMI-CEC the range of functions available differs depend- ing on the type of TV. Refer to the instruction manual of the connected TV.

The computer does not recognize the camcorder even though the camcorder is connected correctly.

-Disconnect the USB cable and turn off the camcorder. After a short while, turn it on again and restore the connection.

-Connect the camcorder to a different USB port on the computer.

Additional Information Š 209