-/,Cannot convert

- Cannot access the memory card. Check the memory card and make sure it is inserted cor- rectly.

-You inserted a MultiMedia Card (MMC) into the camcorder. Use a recommended memory card (A37).

-There was an error creating the file name. Set >[File Numbering] to [Reset] and initialize the memory card (A41) or delete all the photos (A134) and converted SD mov- ies (A60).

Cannot copy

-The total size of the scenes you selected to copy exceeds the available space on the memory card. Delete some recordings on the memory card (A60, 134) or reduce the number of scenes to copy.

-The memory card already contains the maximum number of AVCHD scenes (3,999 scenes). Delete some scenes (A60) to free some space.

-The gallery already contains the maximum number of stories (98 stories in any one given memory). Delete some stories (A63) to free some space.

Cannot divide the scene. Initialize only using the camcorder.

-The scene could not be divided because the camcorder’s internal scene management data log is full. Save your recordings (A146) and initialize the memory (A41). Transfer back the backup files and try dividing the scene again.

--/,Use the supplied software VideoBrowser to save the scene and divide it on the computer.

Cannot enter standby mode now

-The camcorder cannot enter standby mode if the remaining battery charge is too low. Charge or replace the battery pack (A21).

Cannot load canvas

-The canvas file that was saved on the memory is corrupted.

-Canvas data cannot be read from canvas files created using other devices.

Cannot play back

-There is a problem with the memory. If this message appears often without apparent reason, contact a Canon Service Center.

-/,Cannot play back Cannot access the built-in memory

-There is a problem with the built-in memory. Save your recordings (A146) and initialize the built-in memory using the [Complete Initialization] option (A41). If the problem persists, contact a Canon Service Center.

Cannot play back Check the memory card

-There is a problem with the memory card. Save your recordings (A146) and initialize the memory card using the [Complete Initialization] option (A41). If the problem persists, use a different memory card.

212 Š Additional Information