Canon 65 Recording Motion JPEG Movies on a Memory Card, Recording from a Tape in the Camcorder

Recording Motion JPEG Movies on a Memory Card

You can record Motion JPEG movies with the camcorder, from a tape in the camcorder or from devices connected via the DV terminal or the AV terminal. The sound of a movie recorded on a memory card will be monaural.

CAMERA PLAY (VCR) CARD CAMERA CARD PLAY

E

1.Press the start/stop button to begin recording.

•You can keep recording until “CARD FULL” appears.

•With MultiMediaCards, the recording time is limited to 10 sec. in 320 ⋅ 240 pixels and 30 sec. in 160 ⋅ 120 pixels.

2.Press the start/stop button to stop recording.

POWER
CAMERA
PLAY	(VCR)
NETWORK

❍Do not turn off the camcorder, change the position of the TAPE/CARD switch, disconnect the power source, open the memory card cover or remove the memory card while the card access indicator is flashing. Doing so could result in data damage.

❍When you are using a SD Memory Card, make sure that the protect switch is set to allow recording.

❍Do not load/unload a cassette during recording.

❍We recommend using a Canon SD Memory Card, or a SD Memory Card that

guarantees a transfer rate of 2 MB/sec., right after you have formatted it with this camcorder. With memory cards not formatted with this camcorder, or when recording/erasing has been repeatedly performed, the writing speed may be lower and recording may stop.

❍You can select the focusing point when recording a movie on the memory card.

❍Users of Windows XP: When you plan to connect the camcorder to a

computer, keep the length of one movie shorter than approx. 12 min. in 320 ⋅ 240 and 35 min. in 160 ⋅ 120.

Recording from a Tape in the Camcorder

CAMERA PLAY (VCR) CARD CAMERA CARD PLAY

1.Play back the tape.

2.Press the start/stop button when the scene you wish to record appears.

3.Press the start/stop to stop recording.

Using a Memory Card

101