TL-H34 Tele-converter, WD-H34 Wide-converter | Canon 65, 60 specs

TL-H34 Tele-converter

TL-H34 Tele-converter

This Tele-converter lens increases the focal length of the camcorder lens by a factor of 1.5.

•The image stabilizer is not as effective when the Tele-converter is attached.

•The minimum focusing distance with the TL-H34 is 8.2 ft. (2.5 m); 0.98 in. (2.5 cm) at maximum wide angle.

•When the Tele-converter is attached, a shadow may appear in the picture when you record with video light (ELURA70/ELURA65: or with assist lamp or flash).

E

WD-H34 Wide-converter

This lens decreases focal length by a factor of 0.7, giving you a wide perspective for indoor shots or panoramic views.

•When the Wide-converter is attached, a

shadow may appear in the picture when you record with video light (ELURA70/ELURA65: or with assist lamp or flash).

FS-34U Filter Set

Neutral density and MC protector filters help you to control difficult lighting conditions.

VL-10Li Battery Video Light

This compact yet powerful video light can be used for both indoor and outdoor shooting. It attaches to the camcorder’s accessory shoe and is powered by BP-900 series battery packs.

•Approximate usage time: BP-915: 60 min.,

BP-930: 120 min., BP-945: 170 min.

•BP-900 series battery packs are charged with the CA-920 Compact Power Adapter or CH-910 Dual Battery Charger/Holder.

WS-20 Wrist Strap

Use this for extra additional protection for active shooting.

Information

Additional

153

Image 153

Canon 65 TL-H34 Tele-converter, WD-H34 Wide-converter, FS-34U Filter Set, VL-10Li Battery Video Light, WS-20 Wrist Strap

Contents

Manual de Instrucciones Manuel d’instructionNTSC Français Español Important Usage Instructions IMPORTANT SAFETY INSTRUCTIONS a. When the power-supply cord or plug is damaged Symbols and References Used in This Manual Using this ManualPOWER Switch TAPE/CARD Switch Introduction Table of ContentsBasic Functions Advanced Functions Editing Using a Memory CardDirect Printing Transferring Images Checking Supplied Accessories ELURA70/ELURA65/ELURA60 Components Guide Dioptric adjustment lever Viewfinder protect cover Viewfinder ELURA70/ELURA65 only WL-D83 Wireless Controller q w e r t y u i o@0 @1 @2 @3 @4 @5 @6 @7 @8 @9 Attaching the Battery Pack Preparing the Power SupplyCharging the Battery Pack 1. Turn the POWER switch to OFF 2. Move the viewfinder upward 1. Turn the POWER switch to OFF Using a Household Power Source2. Connect the power cord to the power adapter 3. Plug the power cord into a power outlet BP-2L14 Charging, Recording and Playback TimesNB-2LH NB-2L Loading/Unloading a Cassette 2. Load/unload the cassette3. Press the P mark on the cassette compartment until it clicks 2. Pull out the battery holder Installing the Backup Battery4. Insert the battery holder 5. Close the LCD panel 1. Press the OPEN button to open the LCD panel Preparing the Camcorder Adjusting the Viewfinder Dioptric AdjustmentAttaching the Lens Cap Fastening the Grip Belt Attaching the Shoulder Strap Mounting the Wide AttachmentScrew the wide attachment fully into the lens filter thread Inserting Batteries Using the Wireless Controller1. Open the battery cover 2. Insert the batteries following the + 3. Close the battery cover Setting the Time Zone/Daylight Saving Time Setting the Time Zone, Date and TimeSetting the Date and Time 1. Press the MENU button to open the menu 7. Press the MENU button to close the menu and to start the clock 3. Turn the SET dial to select D/T DISPLAY and press the SET dial Displaying Date and Time during Recording4. Turn the SET dial to select ON 5. Press the MENU button to close the menu Recording Recording Movies on a TapeWhen You Have Finished Recording 1. Turn the POWER switch to OFF 5. Disconnect the power source Recording Allowing the Subject to Monitor the LCD Screen 4. Turn the SET dial to adjust the brightness level Adjusting the Brightness of the LCD Screen3. Turn the SET dial to select LCD MIRROR and press the SET dial 4. Turn the SET dial to select OFF e Remaining battery charge Screen Displays during Recordingr When j flashes q Time code Record Review Reviewing and Searching when RecordingPress and release the c record review button Record Search Optical Zoom Zooming 2. Turn the SET dial to select CAMERA SETUP and press the SET dial Digital Zoom4. Turn the SET dial to select a setting option 3. Turn the SET dial to select D.ZOOM and press the SET dial Holding the Camcorder Tips for Making Better VideosFor More Stability Lighting 1. Set the camcorder to PLAY VCR mode Playing Back a Tape2. Open the LCD panel 3. Press the ` button to rewind the tape e/a Playback Pause Special Playback Modes1 Fast Forward Playback / ` Rewind Playback 4a Reverse Playback Adjusting the Volume When Using HeadphonesAdjusting the Volume TVs with Audio/Video Terminals Playing Back on a TV Screen1. Turn off all devices before starting the connections VCR, set the input selector to LINE TVs with S S1-Video Input Terminal 2. Connect the S-150 S-video Cable optional to the S-video terminalsINPUT Selecting the Audio Output Channel 2. Turn the SET dial to select AUDIO SETUP and press the SET dial3. Turn the SET dial to select OUTPUT CH and press the SET dial Selecting Menus and Settings Menus and Settings2. Turn the SET dial to select a submenu and press the SET dial 3. Turn the SET dial to select a menu item and press the SET dial Menu and Default Settings CAMERA MENUCARD PLAY Setting Options PLAY VCR MENU CARD CAMERA MENU RESET, CONTINUOUS Submenu CARD PLAY MENU Easy Recording Program Using the Recording ProgramsProgram AE Modes Auto Selecting the Easy Recording Program Availability of Functions in Each ModeSet the program selector to Selecting the Program AE Mode 1. Set the program selector to Q 2. Press the SET dial3. Select a mode and press the SET dial 1. Set the program selector to Q Using the Night Modes3. Press the NIGHT MODE button 1. Set the program selector to Q 2. Press the NIGHT MODE buttonPage Skin Detail Function Exposure Adjustment Adjusting Exposure ManuallyExposure Lock Turn the SET dial to adjust the brightness of the image 1. Set the program selector to Q 2. Adjust the zoom Adjusting the Focus Manually4. Turn the SET dial to adjust the focus 3. Press the FOCUS button Focus Manually Infinity Focus Setting the White Balance Use the auto setting for normal outdoor scenes 3. Open the menu and select CAMERA SETUP 4. Select SHUTTER Setting the Shutter Speed2. Set the program AE mode to the Auto mode 5. Select the shutter speed and press the SET dial When set to ON, moving subjects may leave a trailing afterimage Auto Slow Shutter Using the Self-Timer When recording movies 1. Press the self-timer button2. Press the start/stop button Tapes recorded in LP mode cannot be used for audio dubbing Changing the Recording Mode SP/LP Audio Recording Changing the Audio ModeWind Screen Recording with an External Microphone Using Headphones during RecordingAdjusting the Headphone Volume 1. Attach the microphone to the accessory shoe Faders Using Digital EffectsFade Trigger FADE-T Wipe WIPE Zigzag ZIGZAG Puzzle PUZZLEBeam BEAM Tide TIDE Effects Availability of Digital Effects by Operating Modes Selecting a Fader1. Press the DIGITAL EFFECTS button 2. Select FADER 3. Select the fader option 2. Select EFFECT 3. Select the effect Selecting an Effect5. Press the ON/OFF button Selecting an Effect in CARD CAMERA Mode 2. Select MULTI-S Using the Multi-Image Screen3. Select S.SPEED 4. Select the transition speed About the multi-image screen Magnifying the Image 1. Move the zoom lever toward T2. Select the magnified area with the SET dial Displaying the Data Code Selecting the Date/Time Display CombinationSelecting the Data Code Display Combination Displaying the Data Code Six-Second Auto DatePress the DATA CODE button In stop mode, press the END SEARCH button End Search 2. When you have finished playback, rewind the tape Returning to a Pre-marked Position Press the + or - button to begin searching Date Search Customizing the Camcorder Changing the My Camera Settings3. Select a setting option and close the menu 1. Open the menu and select MY CAMERA Changing the Date Format Changing the Display Language Turning the Remote Sensor Off Changing the Remote Sensor ModeChanging the Remote Sensor Mode Open the menu and select SYSTEM. Select WL Other Camcorder Settings BeepRecording in 169 Widescreen TV Recording Turning Off the Image Stabilizer Demonstration Mode“i” disappears Using the VFL-1 Video Flash Light Optional Selecting the Flash Mode1. Set the video flash light’s POWER switch to ON About the AF-Assist Lamp Recording to a VCR or Digital Video Device Connecting the Devicesq Connecting a VCR w Connecting a Digital Video Device When connecting a digital video device 6. Press the e/a button when the scene you wish to record appears Recording from Analog Video Devices VCR, TV or Camcorder1. Connect the camcorder to the analog video device 2. Set the camcorder to PLAY VCR mode and load a blank cassette Recording from Digital Video Devices DV Dubbing Copyright Signal1. Connect the camcorder to the digital video device 5. Connected Device Play back the tape You can also connect a VCR with S S1-VIDEO terminal Turning On the Analog-Digital Converter Audio Dubbing Connectingq Connecting an Audio Device Connecting a Microphone 4. Press the PAUSE a button on the wireless controller Dubbing5. Press the AUDIO DUB. button on the wireless controller.12bit STOP 6. Press the PAUSE a button on the wireless controller Playing Back the Added Sound IEEE1394 DV terminal Connecting to a Computer Using a DV IEEE1394 CableCommercially available DV cable 6-pin Inserting the Card Inserting and Removing a Memory CardRemoving the Card 1. Turn off the camcorder 2. Open the cover Selecting the Image Quality/Size Changing the Still Image QualityChanging the Still Image Size Changing the Movie Size File Numbers RESETCONTINUOUS 1. Set the camcorder to CARD CAMERA mode Recording Still Images on a Memory Card2. Press the PHOTO button halfway 3. Press the PHOTO button fully When the Focus-Priority mode is set to ON When the Focus-Priority mode is set to OFF No focusing frame appears2. While you are recording a movie, press the PHOTO button Recording from Other Video Devices Recording from a Tape in the Camcorder1. Play back the tape 2. Connected device Load a recorded cassette and play back the tape e Card Access Display Screen Displays during Still Image Recordingw Remaining Card Capacity for Still Images Reviewing a Still Image Right after Recording 1. Press the start/stop button to begin recording Recording Motion JPEG Movies on a Memory Card2. Press the start/stop button to stop recording 3. Press the start/stop to stop recording q e Card Access Display Screen Displays during Movie Recording4. Press the start/stop button to stop recording w Movie recording time Turning Off the Focus-Priority Mode Selecting the Focusing Point2. Turn the SET dial to display all focusing frames 3. Turn the SET dial to select the focusing point Changing the Drive Mode Selecting the Drive ModeContinuous Shooting/High-Speed Continuous Shooting Press the DRIVE MODE button to switch between the drive modes Press the PHOTO button Auto Exposure Bracketing When Recording in Stitch Assist Mode Recording Panoramic Images Stitch Assist Mode1. Press the button 2. Select the direction with the CARD +/- button 6. Press the button after the last image 1. Set the camcorder to CARD PLAY mode Playing Back a Memory Card2. Press the CARD +/- button to move between images 3. To play back a movie, press the e/a button Index Screen Slide Show1. Press the SLIDE SHOW button 2. Press the SLIDE SHOW button to stop the slide show Press and hold the CARD + or CARD - button Card Jump Function Protecting during Index Screen Display Protecting Images1. Select the image you wish to protect 2. Press the SET dial to open the FILE OPER. menu Erasing a Single Image Erasing ImagesErasing a Single Image/All Images 1. Select the image you wish to erase Card Chroma Key CARD CHROMA Combining Images Card MixCard Luminance Key CARD LUMI Camera Chroma Key CAM. CHROMA 2. Open the menu and select \CARD MIX Card Animation C. ANIMATION3. Select the image you wish to combine with the CARD +/- button 4. Select MIX TYPE 5. Select the mix type matching the sample image you have selected Sample Images7. Close the menu 8. Press the CARD MIX button Camera Chroma Key Card Animation Formatting a Memory Card 1. Open the menu and select CARD OPERATIONS 2. Select FORMAT3. Select EXECUTE 1. Select a still image with the CARD +/- buttons Creating a Start-up Image2. Open the menu and select MY CAMERA 3. Select CREATE START-UP IMAGE 5. Select YES Printing Still Images Connecting the Printer to the Camcorder4. Connect the camcorder to the printer using the cable 2. Turn on the printer 3. Set the camcorder to CARD PLAY mode Cancel Printing PrintingPrinting Errors 1. Select the still image you wish to print with the CARD +/- button When you have finished printing Selecting the Number of Copies Selecting the Print Settings1. Press the SET dial 2. Turn the SET dial to select COPIES and press the SET dial Paper Settings Setting the Print Style2. Turn the SET dial to select the paper size and press the SET dial 3. Turn the SET dial to select the paper type and press the SET dial Setting the Print Effect Image Optimize Including the Date in the Print2. Turn the SET dial to select a setting and press the SET dial 2. Make sure that paper is selected and press the SET dial 3. Turn the SET dial to select the paper size and press the SET dial4. Turn the SET dial to select borders and press the SET dial Selecting the Borders Selecting the Image Style2. Make sure that IMAGE is selected and press the SET dial 3. Turn the SET dial to select the image style and press the SET dial Trimming Settings 2. Change the size of the trimming frame3. Move the trimming frame Selecting Still Images for Printing Print Order Printing with Print Order Settings1. Select the still image you wish to print 3. Select PRINT ORDR 4. Select the number of copies Erasing All Print Orders Cancel Printing/Printing Errors Restarting Printing1. Open the menu and select CARD OPERATIONS 2. Select PRINT ORDERS ALL ERASE Connecting to a Computer Using a USB Cable Preparations Direct Transfer Windows OS Only1. Install the supplied Digital Video Software 2. Connect the camcorder to the computer using the USB cable Transferring a Still Image as Wallpaper Transferring a Selected Image2. Press the button 1. Turn the SET dial to select SELECT & TRANSFER message appears. Turn the SET dial to select OK and press the SET dial Selecting in Index Screen Display Selecting Images for Transfer Transfer OrderErasing All Transfer Orders 1. Select the image you wish to transfer Connection About the NETWORK Mode1. Install DV Messenger 2. Connect the power adapter to the camcorder 4. Connect the camcorder to the computer using a DV cable Screen Displays Hiding the Displays on the LCD ScreenHiding/Showing the Displays on the TV Screen Screen Displays during Recording/Playback CAMERA ModePLAY VCR Mode CARD CAMERA Mode Drive mode Stitch assist Focusing frameCARD PLAY Mode Still image quality Remaining card capacity for still images List of Messages Memory Card Related MessagesPLAYBACK IS RESTRICTED Direct Print Related Messages PRINTER COVER OPEN Explanation Camcorder Handling Precautions Maintenance/OthersCleaning Camcorder Body and Lens Storage Video Heads Viewfinder When condensation is detected How to avoid condensationCondensation Condensation may form in the following cases Battery Pack Handling Precautions About the battery terminal coverDANGER Treat the battery pack with care Memory Card Handling Precautions Cassette Handling Precautions Using the Camcorder Abroad Power SourcesPlayback on a TV Screen Troubleshooting Power SourceRecording/Playback other than the CAMERA mode Recording Playback Memory Card OperationPrinting CA-570 Compact Power Adapter System Diagram Availability differs from area to areaWA-34 Wide Attachment WD-H34 Wide-converter TL-H34 Tele-converter VFL-1 Video Flash Light Use of genuine Canon accessories is recommended Optional AccessoriesBattery Packs CB-2LT Battery Charger TL-H34 Tele-converter VL-10Li Battery Video LightWD-H34 Wide-converter FS-34U Filter Set SC-A50 Soft Carrying Case SC-1000/SC-2000 Soft Carrying CaseVFL-1 Video Flash Light VL-3 Video Light PCM digital sound 16 bit 48 kHz/2 ch 12 bit 32 kHz/4 ch BP-2L14/NB-2LH Battery Pack CA-570 Compact Power AdapterSDC-8M SD Memory Card Power/Others Item Codes Provided AccessoriesOptional Accessories Index Page U.S.A CANON CONSUMER DIGITAL VIDEO EQUIPMENT LIMITED WARRANTY CANADATO OBTAIN WARRANTY SERVICE LIMITATIONS Document réalisé avec du papier recyclé à 100% Printed on 100% reused paperEl papel aqui utilizado es 100% reciclado CANON INC