Canon 60, 65 Recording Movies on a Tape, Before You Begin Recording, Disconnect the power source

Recording Movies on a Tape

Before You Begin Recording

Make a test recording first to check if the camcorder operates correctly. Before you make important recordings, clean the video heads ( 143).

Recording

1.Remove the lens cap.

2.Set the camcorder to CAMERA mode.

Set the POWER switch to CAMERA and the TAPE/CARD switch to b.

3.Push the OPEN button at the LCD panel and open the LCD panel.

4.Press the start/stop button to begin recording.

Press the start/stop button again to pause recording.

q

w

POWER

CAMERA

OFF

PLAY(VCR)

NETWORK

POWER

CAMERA

PLAY (VCR)

NETWORK

r

e

When You Have Finished Recording

1.Turn the POWER switch to OFF.

2.Close the LCD panel and return the viewfinder into its initial position.

3.Replace the lens cap.

4.Unload the cassette.

5.Disconnect the power source.

24