Charging, Recording and Playback Times, BP-2L14, NB-2LH | Canon 65

❍Charging, Recording and Playback Times

❍Charging, Recording and Playback Times

Below times are approximate and vary according to the charging, recording or playback conditions.

		BP-2L14	NB-2LH	NB-2L	BP-2L12
Charging Time		210 min.	115 min.	110 min.	180 min.
Max. Recording	Viewfinder	240 min.	115 min.	95 min.	200 min.
Time	LCD	190 min.	90 min.	75 min.	150 min.
Typical Recording	Viewfinder	135 min.	65 min.	50 min.	110 min.
Time*	LCD	105 min.	50 min.	40 min.	85 min.
Playback Time		220 min.	105 min.	85 min.	175 min.

*Approximate times for recording with repeated operations such as start/stop, zooming, power on/off. Actual time may be shorter.

❍We recommend charging the battery pack in temperatures between 50 ˚F and 86 ˚F (10 ˚C and 30 ˚C). Outside the temperature range of 32 ˚F to 104 ˚F (0 ˚C to 40 ˚C), the CHARGE indicator flashes rapidly and charging stops.

❍A lithium ion battery pack can be charged at any charge state. Unlike conventional battery packs, you do not need to completely use or discharge it before charging.

❍We recommend that you prepare battery packs 2 to 3 times longer than you think you might need.

❍To conserve battery charge, turn off the camcorder instead of leaving it in record pause mode.

E

Preparations	Basic Functions
	-

15

Image 15

Canon 65, 60 instruction manual Charging, Recording and Playback Times, BP-2L14, NB-2LH, BP-2L12, Charging Time

Contents

Français Español Manuel d’instructionManual de Instrucciones NTSC Important Usage Instructions IMPORTANT SAFETY INSTRUCTIONS a. When the power-supply cord or plug is damaged TAPE/CARD Switch Using this ManualSymbols and References Used in This Manual POWER Switch Advanced Functions Table of ContentsIntroduction Basic Functions Transferring Images Using a Memory CardEditing Direct Printing Checking Supplied Accessories ELURA70/ELURA65/ELURA60 Components Guide Dioptric adjustment lever Viewfinder protect cover Viewfinder ELURA70/ELURA65 only WL-D83 Wireless Controller q w e r t y u i o@0 @1 @2 @3 @4 @5 @6 @7 @8 @9 1. Turn the POWER switch to OFF 2. Move the viewfinder upward Preparing the Power SupplyAttaching the Battery Pack Charging the Battery Pack 3. Plug the power cord into a power outlet Using a Household Power Source1. Turn the POWER switch to OFF 2. Connect the power cord to the power adapter NB-2L Charging, Recording and Playback TimesBP-2L14 NB-2LH Loading/Unloading a Cassette 2. Load/unload the cassette3. Press the P mark on the cassette compartment until it clicks 1. Press the OPEN button to open the LCD panel Installing the Backup Battery2. Pull out the battery holder 4. Insert the battery holder 5. Close the LCD panel Fastening the Grip Belt Adjusting the Viewfinder Dioptric AdjustmentPreparing the Camcorder Attaching the Lens Cap Attaching the Shoulder Strap Mounting the Wide AttachmentScrew the wide attachment fully into the lens filter thread 3. Close the battery cover Using the Wireless ControllerInserting Batteries 1. Open the battery cover 2. Insert the batteries following the + 1. Press the MENU button to open the menu Setting the Time Zone, Date and TimeSetting the Time Zone/Daylight Saving Time Setting the Date and Time 7. Press the MENU button to close the menu and to start the clock 5. Press the MENU button to close the menu Displaying Date and Time during Recording3. Turn the SET dial to select D/T DISPLAY and press the SET dial 4. Turn the SET dial to select ON 5. Disconnect the power source Recording Movies on a TapeRecording When You Have Finished Recording 1. Turn the POWER switch to OFF Recording Allowing the Subject to Monitor the LCD Screen 4. Turn the SET dial to select OFF Adjusting the Brightness of the LCD Screen4. Turn the SET dial to adjust the brightness level 3. Turn the SET dial to select LCD MIRROR and press the SET dial q Time code Screen Displays during Recordinge Remaining battery charge r When j flashes Record Search Reviewing and Searching when RecordingRecord Review Press and release the c record review button Optical Zoom Zooming 3. Turn the SET dial to select D.ZOOM and press the SET dial Digital Zoom2. Turn the SET dial to select CAMERA SETUP and press the SET dial 4. Turn the SET dial to select a setting option Lighting Tips for Making Better VideosHolding the Camcorder For More Stability 3. Press the ` button to rewind the tape Playing Back a Tape1. Set the camcorder to PLAY VCR mode 2. Open the LCD panel 4a Reverse Playback Special Playback Modese/a Playback Pause 1 Fast Forward Playback / ` Rewind Playback Adjusting the Volume When Using HeadphonesAdjusting the Volume VCR, set the input selector to LINE Playing Back on a TV ScreenTVs with Audio/Video Terminals 1. Turn off all devices before starting the connections TVs with S S1-Video Input Terminal 2. Connect the S-150 S-video Cable optional to the S-video terminalsINPUT Selecting the Audio Output Channel 2. Turn the SET dial to select AUDIO SETUP and press the SET dial3. Turn the SET dial to select OUTPUT CH and press the SET dial 3. Turn the SET dial to select a menu item and press the SET dial Menus and SettingsSelecting Menus and Settings 2. Turn the SET dial to select a submenu and press the SET dial Menu and Default Settings CAMERA MENUCARD PLAY Setting Options PLAY VCR MENU CARD CAMERA MENU RESET, CONTINUOUS Submenu CARD PLAY MENU Auto Using the Recording ProgramsEasy Recording Program Program AE Modes Selecting the Easy Recording Program Availability of Functions in Each ModeSet the program selector to Selecting the Program AE Mode 1. Set the program selector to Q 2. Press the SET dial3. Select a mode and press the SET dial 1. Set the program selector to Q 2. Press the NIGHT MODE button Using the Night Modes1. Set the program selector to Q 3. Press the NIGHT MODE buttonPage Skin Detail Function Turn the SET dial to adjust the brightness of the image Adjusting Exposure ManuallyExposure Adjustment Exposure Lock 3. Press the FOCUS button Adjusting the Focus Manually1. Set the program selector to Q 2. Adjust the zoom 4. Turn the SET dial to adjust the focus Focus Manually Infinity Focus Setting the White Balance Use the auto setting for normal outdoor scenes 5. Select the shutter speed and press the SET dial Setting the Shutter Speed3. Open the menu and select CAMERA SETUP 4. Select SHUTTER 2. Set the program AE mode to the Auto mode When set to ON, moving subjects may leave a trailing afterimage Auto Slow Shutter Using the Self-Timer When recording movies 1. Press the self-timer button2. Press the start/stop button Tapes recorded in LP mode cannot be used for audio dubbing Changing the Recording Mode SP/LP Audio Recording Changing the Audio ModeWind Screen 1. Attach the microphone to the accessory shoe Using Headphones during RecordingRecording with an External Microphone Adjusting the Headphone Volume Wipe WIPE Using Digital EffectsFaders Fade Trigger FADE-T Tide TIDE Puzzle PUZZLEZigzag ZIGZAG Beam BEAM Effects 2. Select FADER 3. Select the fader option Selecting a FaderAvailability of Digital Effects by Operating Modes 1. Press the DIGITAL EFFECTS button Selecting an Effect in CARD CAMERA Mode Selecting an Effect2. Select EFFECT 3. Select the effect 5. Press the ON/OFF button 4. Select the transition speed Using the Multi-Image Screen2. Select MULTI-S 3. Select S.SPEED About the multi-image screen Magnifying the Image 1. Move the zoom lever toward T2. Select the magnified area with the SET dial Displaying the Data Code Selecting the Date/Time Display CombinationSelecting the Data Code Display Combination Displaying the Data Code Six-Second Auto DatePress the DATA CODE button In stop mode, press the END SEARCH button End Search 2. When you have finished playback, rewind the tape Returning to a Pre-marked Position Press the + or - button to begin searching Date Search 1. Open the menu and select MY CAMERA Changing the My Camera SettingsCustomizing the Camcorder 3. Select a setting option and close the menu Changing the Date Format Changing the Display Language Open the menu and select SYSTEM. Select WL Changing the Remote Sensor ModeTurning the Remote Sensor Off Changing the Remote Sensor Mode Other Camcorder Settings BeepRecording in 169 Widescreen TV Recording Turning Off the Image Stabilizer Demonstration Mode“i” disappears Using the VFL-1 Video Flash Light Optional Selecting the Flash Mode1. Set the video flash light’s POWER switch to ON About the AF-Assist Lamp w Connecting a Digital Video Device Connecting the DevicesRecording to a VCR or Digital Video Device q Connecting a VCR When connecting a digital video device 2. Set the camcorder to PLAY VCR mode and load a blank cassette Recording from Analog Video Devices VCR, TV or Camcorder6. Press the e/a button when the scene you wish to record appears 1. Connect the camcorder to the analog video device 5. Connected Device Play back the tape Copyright SignalRecording from Digital Video Devices DV Dubbing 1. Connect the camcorder to the digital video device You can also connect a VCR with S S1-VIDEO terminal Turning On the Analog-Digital Converter Connecting a Microphone ConnectingAudio Dubbing q Connecting an Audio Device 6. Press the PAUSE a button on the wireless controller Dubbing4. Press the PAUSE a button on the wireless controller 5. Press the AUDIO DUB. button on the wireless controller.12bit STOP Playing Back the Added Sound 6-pin Connecting to a Computer Using a DV IEEE1394 CableIEEE1394 DV terminal Commercially available DV cable 1. Turn off the camcorder 2. Open the cover Inserting and Removing a Memory CardInserting the Card Removing the Card Selecting the Image Quality/Size Changing the Still Image QualityChanging the Still Image Size Changing the Movie Size File Numbers RESETCONTINUOUS 3. Press the PHOTO button fully Recording Still Images on a Memory Card1. Set the camcorder to CARD CAMERA mode 2. Press the PHOTO button halfway When the Focus-Priority mode is set to ON When the Focus-Priority mode is set to OFF No focusing frame appears2. While you are recording a movie, press the PHOTO button 2. Connected device Load a recorded cassette and play back the tape Recording from a Tape in the CamcorderRecording from Other Video Devices 1. Play back the tape Still Images Screen Displays during Still Image Recordinge Card Access Display w Remaining Card Capacity for Reviewing a Still Image Right after Recording 3. Press the start/stop to stop recording Recording Motion JPEG Movies on a Memory Card1. Press the start/stop button to begin recording 2. Press the start/stop button to stop recording w Movie recording time Screen Displays during Movie Recordingq e Card Access Display 4. Press the start/stop button to stop recording 3. Turn the SET dial to select the focusing point Selecting the Focusing PointTurning Off the Focus-Priority Mode 2. Turn the SET dial to display all focusing frames Press the DRIVE MODE button to switch between the drive modes Selecting the Drive ModeChanging the Drive Mode Continuous Shooting/High-Speed Continuous Shooting Press the PHOTO button Auto Exposure Bracketing 2. Select the direction with the CARD +/- button Recording Panoramic Images Stitch Assist ModeWhen Recording in Stitch Assist Mode 1. Press the button 6. Press the button after the last image 3. To play back a movie, press the e/a button Playing Back a Memory Card1. Set the camcorder to CARD PLAY mode 2. Press the CARD +/- button to move between images 2. Press the SLIDE SHOW button to stop the slide show Slide ShowIndex Screen 1. Press the SLIDE SHOW button Press and hold the CARD + or CARD - button Card Jump Function 2. Press the SET dial to open the FILE OPER. menu Protecting ImagesProtecting during Index Screen Display 1. Select the image you wish to protect 1. Select the image you wish to erase Erasing ImagesErasing a Single Image Erasing a Single Image/All Images Camera Chroma Key CAM. CHROMA Combining Images Card MixCard Chroma Key CARD CHROMA Card Luminance Key CARD LUMI 4. Select MIX TYPE Card Animation C. ANIMATION2. Open the menu and select \CARD MIX 3. Select the image you wish to combine with the CARD +/- button 8. Press the CARD MIX button Sample Images5. Select the mix type matching the sample image you have selected 7. Close the menu Camera Chroma Key Card Animation Formatting a Memory Card 1. Open the menu and select CARD OPERATIONS 2. Select FORMAT3. Select EXECUTE 5. Select YES Creating a Start-up Image1. Select a still image with the CARD +/- buttons 2. Open the menu and select MY CAMERA 3. Select CREATE START-UP IMAGE 2. Turn on the printer 3. Set the camcorder to CARD PLAY mode Connecting the Printer to the CamcorderPrinting Still Images 4. Connect the camcorder to the printer using the cable 1. Select the still image you wish to print with the CARD +/- button PrintingCancel Printing Printing Errors When you have finished printing 2. Turn the SET dial to select COPIES and press the SET dial Selecting the Print SettingsSelecting the Number of Copies 1. Press the SET dial 3. Turn the SET dial to select the paper type and press the SET dial Setting the Print StylePaper Settings 2. Turn the SET dial to select the paper size and press the SET dial Setting the Print Effect Image Optimize Including the Date in the Print2. Turn the SET dial to select a setting and press the SET dial 2. Make sure that paper is selected and press the SET dial 3. Turn the SET dial to select the paper size and press the SET dial4. Turn the SET dial to select borders and press the SET dial 3. Turn the SET dial to select the image style and press the SET dial Selecting the Image StyleSelecting the Borders 2. Make sure that IMAGE is selected and press the SET dial Trimming Settings 2. Change the size of the trimming frame3. Move the trimming frame 3. Select PRINT ORDR 4. Select the number of copies Printing with Print Order SettingsSelecting Still Images for Printing Print Order 1. Select the still image you wish to print 2. Select PRINT ORDERS ALL ERASE Cancel Printing/Printing Errors Restarting PrintingErasing All Print Orders 1. Open the menu and select CARD OPERATIONS Connecting to a Computer Using a USB Cable 2. Connect the camcorder to the computer using the USB cable Direct Transfer Windows OS OnlyPreparations 1. Install the supplied Digital Video Software 1. Turn the SET dial to select SELECT & TRANSFER Transferring a Selected ImageTransferring a Still Image as Wallpaper 2. Press the button message appears. Turn the SET dial to select OK and press the SET dial 1. Select the image you wish to transfer Selecting Images for Transfer Transfer OrderSelecting in Index Screen Display Erasing All Transfer Orders 4. Connect the camcorder to the computer using a DV cable About the NETWORK ModeConnection 1. Install DV Messenger 2. Connect the power adapter to the camcorder Screen Displays Hiding the Displays on the LCD ScreenHiding/Showing the Displays on the TV Screen Screen Displays during Recording/Playback CAMERA ModePLAY VCR Mode Still image quality Remaining card capacity for still images Drive mode Stitch assist Focusing frameCARD CAMERA Mode CARD PLAY Mode List of Messages Memory Card Related MessagesPLAYBACK IS RESTRICTED Direct Print Related Messages PRINTER COVER OPEN Explanation Storage Maintenance/OthersCamcorder Handling Precautions Cleaning Camcorder Body and Lens Video Heads Viewfinder Condensation may form in the following cases How to avoid condensationWhen condensation is detected Condensation Battery Pack Handling Precautions About the battery terminal coverDANGER Treat the battery pack with care Memory Card Handling Precautions Cassette Handling Precautions Using the Camcorder Abroad Power SourcesPlayback on a TV Screen Troubleshooting Power SourceRecording/Playback other than the CAMERA mode Recording Playback Memory Card OperationPrinting VFL-1 Video Flash Light System Diagram Availability differs from area to areaCA-570 Compact Power Adapter WA-34 Wide Attachment WD-H34 Wide-converter TL-H34 Tele-converter CB-2LT Battery Charger Optional AccessoriesUse of genuine Canon accessories is recommended Battery Packs FS-34U Filter Set VL-10Li Battery Video LightTL-H34 Tele-converter WD-H34 Wide-converter VL-3 Video Light SC-1000/SC-2000 Soft Carrying CaseSC-A50 Soft Carrying Case VFL-1 Video Flash Light PCM digital sound 16 bit 48 kHz/2 ch 12 bit 32 kHz/4 ch Power/Others CA-570 Compact Power AdapterBP-2L14/NB-2LH Battery Pack SDC-8M SD Memory Card Item Codes Provided AccessoriesOptional Accessories Index Page U.S.A LIMITATIONS CANADACANON CONSUMER DIGITAL VIDEO EQUIPMENT LIMITED WARRANTY TO OBTAIN WARRANTY SERVICE CANON INC Printed on 100% reused paperDocument réalisé avec du papier recyclé à 100% El papel aqui utilizado es 100% reciclado