Safety Precautions

•Avoid using, placing or storing the product in the following places:

-Places subject to strong sunlight

-Places subject to temperatures above 40 °C (104 °F)

-Humid or dusty areas

 

 

 

A2400 IS

 

A4000 IS

A3400 IS

A2300

These could cause leakage, overheating or an explosion of the battery, resulting in electrical shock, fire, burns or other injuries.

High temperatures may cause deformation of the camera or battery charger casing.

A1300 A810

These could cause leakage, overheating or an explosion of the batteries, resulting in electrical shock, fire, burns or other injuries.

Caution Denotes the possibility of damage to the equipment.

•Do not aim the camera at bright light sources (such as the sun on a clear day). Doing so may damage the image sensor.

•When using the camera on a beach or at a windy location, be careful not to allow dust or sand to enter the camera.

This may cause the product to malfunction.

•In regular use, small amounts of smoke may be emitted from the flash.

This is due to the high intensity of the flash burning dust and foreign materials stuck to the front of the unit. Please use a cotton swab to remove dirt, dust or other foreign matter from the flash to prevent heat build-up and damage to the unit.

A4000 IS

 

A3400 IS

A2400 IS

A2300

 

•Remove and store the battery when you are not using the camera.

If the battery is left inside the camera, damage caused by leakage may occur.

A1300 A810

•Remove and store the batteries when you are not using the camera.

If the batteries are left inside the camera, damage caused by leakage may occur.

 

 

 

A2400 IS

A2300

A4000 IS

A3400 IS

•Before you discard the battery, cover the terminals with tape or other insulators.

A1300 A810

•Before you discard the batteries, cover the terminals with tape or other insulators.

Contacting other metal materials may lead to fire or explosions.

13