Shooting Range and Focusing

Still Images

Shooting with Servo AF

This mode helps avoid missing shots of subjects in motion, because the camera continues to focus on the subject and adjust the exposure as long as you press the shutter button halfway.

Configure the setting.

zPress the nbutton, choose [Servo AF] on the 4tab, and then choose [On] (p. 45).

Focus.

zThe focus and exposure are maintained where the blue AF frame is displayed while you are pressing the shutter button halfway.

Focusing may not be possible in some shooting conditions.

In low-light conditions, Servo AF may not be activated (AF frames may not turn blue) when you press the shutter button halfway. In this case, the focus and exposure are set according to the specified AF frame mode.

If adequate exposure cannot be obtained, shutter speeds and aperture values are displayed in orange. Release the shutter button, and then press it halfway again.

AF lock shooting is not available.

[AF-Point Zoom] on the 4tab is not available.

Not available when using the self-timer (p. 57).

97