2
Using a TCP/IP Network (Windows/UNIX)
Using a Web Browser (Remote UI)
Instead of using the operation panel of your machine, or NetSpot, you can use a web browser (Remote UI) to specify the protocol settings.
NOTE
If you change the IP address from the Remote UI, the change will not be reflected on the display of your machine. You can confirm the change of the IP address by selecting <VIEW IP ADDRESS> from the NETWORK SETTINGS menu, or by printing the User’s Data List.
1 Start the web browser ➞ enter the URL below in [Location] or [Address] ➞ press [ENTER] on the keyboard.
http://<machine host name or IP address >/
Input Example: http://192.168.203.115/
IMPORTANT
•Make sure you are using Netscape Navigator/Communicator 4.04 or later, or Internet Explorer 4.01 SP1 or later for your web browser.
•You cannot set this machine’s protocol settings through Netscape Communicator 4.08 with Turbolinux 4.0. You have to use a different version or web browser.
•If you are using a connection via a proxy server, follow these directions: (The settings may differ depending on the network environment.)
- When configuring your web browser to use the proxy server, add the IP address of the machine to “Exception” (the address not using the proxy server).
- Set up the web browser to accept cookies.
•If more than one Remote UI is running at the same time, only the last setting specified will be valid. It is recommended that only one Remote UI run at a time.