Canon 700 manual To set up the printer’s location, follow the procedure below

4

Using a NetBIOS Network (Windows 95/98/Me)

Installing the Printer Driver

To print from a computer, you must install a printer driver. (See Chapter 1, “Before You Start Using This Machine,” in the PCL Driver Guide.) During the installation procedure, select [Local printer]. Do not select [Network printer].

The port selection can be changed after installation. You can select any port, such as [LPT1].

Printer’s Location Setting

To set up the printer’s location, follow the procedure below.

1 Install the NetBIOS/NetBEUI Port Monitor Utility on the

CD-ROM provided with the optional Network Kit III.

❑Insert the CD-ROM supplied with the optional Network Kit III into the CD-ROM drive.

❑Double-click the [My Computer] icon.

❑Right click the CD-ROM drive icon ➞ click [Open] on the pop-up menu.

❑Double-click the [Portmon] folder.

❑Double-click the [Setup.exe] icon. The install program starts.

❑Follow the on screen instructions to complete the installation of the NetBIOS/NetBEUI Port Monitor Utility software.

NOTE

Depending on your system environment, the CD-ROM menu may be automatically displayed after you insert the CD-ROM into the CD-ROM drive. In this case, click [End] ➞ proceed to step 2.

2 Open the printer’s properties dialog box.

❑On the taskbar, click [Start] ➞ point to [Settings] ➞ click [Printers].

❑Right click the printer icon you want to use for printing.

4-4Setting Up a Computer for Printing