Canon 700 manual Set up a queue assign the print server to the queue

3

Using a NetWare Network (Windows)

Using PCONSOLE in the NDS Queue Server Mode or Remote Printer (Bindery) Mode (NetWare 3.x)

1 Log on to NetWare as the Administrator ➞ start PCONSOLE.

2 If you have not set up a print server, follow the directions below.

❑On the [Available Options] menu, select [Print Server Information] ➞ press [ENTER] on the keyboard.

❑Press [INSERT] on the keyboard.

❑Enter the name of the print server ➞ press [ENTER] on the keyboard.

❑Press [ESC] on the keyboard to return to the [Available Options] menu.

NOTE

•Be sure to remember the name of the print server you are creating. You need it to specify the printer’s protocol settings.

•To use the machine in the Queue Server mode in a multiple NetWare server environment, use the same print server name for each NetWare server.

3 Set up a queue ➞ assign the print server to the queue.

❑On the [Available Options] menu, select [Print Queue Information] ➞ press [ENTER] on the keyboard.

❑Press [INSERT] on the keyboard.

❑Enter the name of the queue ➞ press [ENTER] on the keyboard.

❑Select the name of the queue from the existing queue list ➞ press [ENTER] on the keyboard.

❑Select [Queue Servers] ➞ press [ENTER] on the keyboard.

❑Press [INSERT] on the keyboard.

❑Select the print server you set up in step 2 ➞ press [ENTER] on the keyboard.

❑Press [ESC] on the keyboard repeatedly until the [Available Options] menu appears.

3-6NetWare Print Service Settings