Canon 700 Using ARP/PING Commands, Click OK, Start up the MS-DOS prompt or the Command prompt

11 Click [OK].

The settings become valid after you reset the print server or restart the machine.

To reset the print server, under [Device Manager], on the left column of the screen, select [Network] ➞ click [Reset].

The protocol settings are complete.

Using ARP/PING Commands

Instead of using the operation panel of your machine, NetSpot, or the Remote UI, you can use ARP/PING commands to specify the protocol settings.

1 Start up the MS-DOS prompt or the Command prompt.

If you are using UNIX, display the Console screen, and then log on as a superuser.

2 Execute the following command to add a static entry to the arp table.

arp -s<IP Address> <MAC Address>

IP Address:	Specify the IP address you want to allocate to the machine.
	The IP address consists of four numbers delimited by periods,
	ranging from 0 to 255.

2

Using a TCP/IP Network (Windows/UNIX)

Specifying Protocol Settings 2-19