Canon 7365 user manual ❹ Part Names of the Remote Control

1. Introduction

❹Part Names of the Remote Control

			1
	POWER	INFO.
2			3
	IMAGE	INPUT AUTO PC
4			6
7	ASPECT	NO SHOW	8
	MENU
9			5
			10
11		BACK	12
13	L-CLICK	R-CLICK	14
15	VOL	PAGE D.ZOOM	17
16

FREEZE	18
	RD-428E

1.Infrared Transmitter

Direct the remote control toward the remote sensor on the projector cabinet.

2.POWER Button

When the main power is on, you can use this button to turn your projector on.

NOTE: To turn on the projector, press and hold the POWER button for about 1 second.

You can use this button to turn your projector off.

NOTE: To turn off the projector, press this button twice.

3.INFO. Button

Provides the information on the current signal and projector settings. See page 54.

4.IMAGE Button

Press this button to display the Image adjustment menu to adjust Image mode, Contrast, Brightness, Sharpness, Color level and Color balance. See pages 45 to 46.

5.INPUT Button

Selecting from INPUT List

Press and quickly release the INPUT button to dis- play the INPUT list. Each time the INPUT button is pressed, the input source will change as follows:

Computer 1* → Computer 2 (Digital)* → Computer 2 (Analog)* → VIDEO → S-VIDEO → Computer 1* → ...

To display the selected source, press the OK button or allow 2 seconds to elapse.

Detecting the Signal Automatically

Press and hold the INPUT button for a minimum of 2 seconds, the projector will search for the next available input source. Each time you press and hold the INPUT button for a minimum of 2 seconds, the input source will change as follows:

Computer 1* → Computer 2 (Digital)* → Computer 2 (Analog)* → VIDEO → S-VIDEO → Computer 1* → ...

* LV-7260/LV-X7:Computer → VIDEO → S-VIDEO → Computer → ...

6.AUTO PC Button

Use this button to adjust an analog RGB source for an optimal picture. See page 31.

7.ASPECT Button

Press this button once to display the Aspect select menu. Keep pressing will change aspect ratios. See page 46.

8.NO SHOW Button

This button turns off the image and sound for a short period of time. Press again to restore the im- age and sound. See page 34.

9.MENU Button

Displays the menu for various settings and adjust- ments. See page 40, 41.

10.SELECT (Mouse) Button See page 40.

: Use these buttons to select the menu of the item you wish to adjust.

: Use these buttons to change the level of a selected menu item. A press of the button executes the selection.

When an image is magnified, the SELECT button moves the image. See page 34.

This button also works as a computer mouse when the supplied remote mouse receiver is connected with your computer. See page 36. (This button can- not be used as a computer mouse for LV-X7.)