COMPONENT NAMES (continued)
Remote control
POWER OFF button 
POWER ON button 
MUTE button 
VOL
POWER ON/OFF button
VOLUME UP/DOWN buttons
RGB/VIDEO buttons 
PinP button 
AUTO button 
MENU button 
RGB 1 | RGB 2 | MUTE | VOL |
AV1 | AV2 | AV3 | AV4 |
AUTO PinP SIZE RECALL
MENU
SIZE button
RECALL button
RETURN button
| OK |
OK button |
|
ID | ID SET |
ID button 
SELECT/ADJUST buttons
ID SET button
Loading Batteries
1. Open the battery cover.
• Slide back and remove the battery cover in the direction of the arrow.
2.Load batteries.
•Load two Size AA batteries included observing the correct polarities.
3.Close the battery cover.
•Replace the battery cover in the direction of the arrow and snap it back into place.
Handling the Remote Control
Use the remote control within about 5 m from front of the unit’s
With in 30
With in 30 degrees degrees
About 3m | About 3m |
About 5m
CAUTION
•Do not use new and old batteries together. The batteries could explode or leak, resulting in fires, physical injury, or stains.
•When loading batteries, observe their correct polarities as marked on the product. If loaded in the wrong direction, the batteries could explode or leak, resulting in fires, physical injury, or stains.
ATTENTION
•Do not drop or impact the remote control.
•Do not splash the remote control with water or put it on a wet object to avoid possible failures.
•Before leaving the remote control out of use for an extended period of time, remove the batteries from it.
•If the remote control begins to lack responsiveness, replace the batteries.
•Strong light such as direct sunlight impinging on the photoreceptor of the remote control can cause operational failure. Position this unit to avoid direct contact with such light.
